JCB Parts Lubes
PINS AND BUSHES
- Pins are hardened from the outside till 4 mm depth.
- Bushes have a soft outer surface and a hard inner surface with grooves.
- Low wear-out rate, Long life and less prone to corrosion.
- A soft outer surface enables easy fitment and removal without damaging the structure.
- The hard inner surface matches the outer hardness of the Pins.
CUTTER KIT (TEETH & SIDE CUTTER)
- Made from Carbon Manganese Steel with Boron content.
- Heat Treated and Stress Relieved
- Better Digging and Cutting of Earth resulting in —
- Diesel Savings
- More Work per Hour
- Better Wear Resistance
- Longer Life
- Life Long Sharpness
HYDRAULIC AND TRANSMISSION FILTER
- Filter Papers have high burst strength.
- Can resist High Fluctuations in flow of Oil.
- Oil Filtration Capacity Hydraulic Filter - 10 Microns Trans Filter - 15 Microns
- Filter Paper threads do not come out & clog the system.
- Ensures long life of Hydraulic Pump & Valve Block.
- Only clean oil goes into the system.
SEALS AND “O” RINGS
- Seals are made from PTFE (Poly TetraFluoro Ethylene) or PU (Poly Urethane)
- Does not get Flattened
- Low frictional resistance
- Can work at High Temperatures (90 Degrees Centigrade)
- Effective Sealing and no leakage of Hydraulic Oil
TRANSFER GEAR
- CNC machined gear teeth & splines. Made with safety factors like gear hobbing, heat treatment, smooth lapping and deburring.
- Long life Vibration free operation
- Longer bearing life Reduced noise level
HYDRAULIC PUMP
- Consistent operation over large temperature range.
- Capable of continuous working for long hours.
- Designed to withstand 250 bar pressure while machine needs 230 bar pressure capability.
- Higher Productivity
- Reliable performance.
- High safety factor of 20 bars.
JCB GREASE SPECIAL
- JCB Grease Special is manufactured from lithium complex soap having extreme pressure and anti-wear additives.
- High drop point
- High structure stability
- Effective Lubrication in wet conditions
- Excellent lubrication under heavy loads and low speed
- Superior lubrication & protection of components under heavy load conditions
- Suitable for a wide range of operating temperatures Reduced grease caking
- Lower bearing failures Increased re-lubrication intervals / Long service life
- Extended bearing life
- Higher bearing life and lower power consumption.
JCB TRANSMISSION OIL PLUS
- High load-carrying capacity.
- Ensures smooth shifting.
- Offers enhanced protection against rust & corrosion.
- Reduces wear & tear of gears.
- Offers extended drain period up to 1000hrs.
JCB REAR AXLE OIL
- Prevents squawking and chattering in wet Brake System.
- Minimises Metal to Metal contacts in Gear transmission
- Heavily loaded Final Drive
- Wider temperature operation.
- Reduces wear and tear of components and prolongs life.
- Ensures smooth trouble-free operation over extended service periods.
JCB ENGINE OIL MAX
- Increased engine overhaul period.
- Better engine durability.
- Lower oil consumption.
- Keep the engine operating at peak performance all the time.
- JCB Engine Oil Max meets the requirements of API CI-4 Plus & JCB Standard 00080.
JCB GEAR OIL
- Excellent protection under severe conditions, against Gear wear Scuffing & scorning
- Resists foaming & protects against Staining Rust & corrosion in presence of water
- Prevents scuffing/scoring of gears under severe operating conditions thus prolonging life
JCB HVI HYDRAULIC OIL
- Super Clean(NAS 6*) results in
- Longer hydraulic pump & valve life
- Minimum particle built-up at filters
- Avoids catastrophic failure
- Additive package ensures
- Minimum wear and allows for trouble-free operation
- High mechanical efficiency
- Enhanced seals & filter Life De-emulsibilty
- Excellent protection against rust, corrosion, and metal fatigue.
- Increased life of the hydraulic pump, motor, and valve leading to reduced downtime.
- Very high oxidation stability prevents oil thickening and sludge formation and offers extended service life.
JCB GEAR OIL LS
- Controlled and continuous frictional properties over the life of the fluid.
- Good viscosity/temperature stability and low-temperature flow properties.
- Compatible with all conventional seal materials used by axle manufacturers reducing the likelihood of leaks and failures.
- Effective wear protection even under severe load conditions which prolongs component life.
JCB COOLANT PREMIX
- Improved heat transfer.
- Ready to use and provides long-life corrosion protection.
- The product offers protection down to -37°C.
- It may be used with confidence in engines manufactured from cast iron, aluminium, or copper alloy.
JCB Grease EDGE
- STRONGLY ADHESIVE, protects from wear even under extreme conditions
- JCB greases are designed to withstand at high temperature and their drop point is very high (>180℃).
- JCB Greases are having very high weld load(250kg)
- They perform under severe conditions and high loads
- JCB grease is having 2 times better TCO than Non genuine greases
- JCB grease Doubles the life of Pin bush JCB grease provides Robust oil film b/w sliding surfaces
JCB Reman
- Value for money, Genuine performance, Environmentally friendly.
- Saving Upto 40*%
- When you need a part for JCB big repair ask your JCB dealership about JCB recon parts.
- These Parts are developed to match JCB Machine specifications, they offer you the quality product at a very attractive price.
- By choosing JCB Recon Parts for repairing your machine, be assure about quality and specification that will match to your machine.
- Competitive Pricing
- Environment friendly- due to lesser use of raw materials and energy, recon parts will reduce the number of disposals.
- Warranty is 6 Months or 1000 hrs. whichever is earlier
JCB DEF
- High purity aqueous urea
- Used as NOx reducing agent for SCR exhaust gas
- Fully biodegradable and does not pollute water and soil
- Reduces maintenance cost
- Extends SCR system life span
- Improves fuel economy
- Hazards of using non-genuine DEF
- Reduced scr system lifespan
- Increased emission of pollutants
- Clogged catalytic converter, injector & exhaust
JCB TYRES
- Cross-ply and radial construction specifically designed for JCB machines
- Sitemaster tyres are designed to deliver unrivalled performance, traction and stability
- Excellent grip and minimal slip levels while working on soft terrain.
- Ensures operator comfort, with reduced running costs.
HOSES
- Endurance tested to last more than 10 lakh pressure cycles.
- Good Quality Rubber
- Absolutely Flexible No Internal & External cracks
- Withstand high burst pressure of 6000 PSI (Pounds per square inch).
- Long Life & Reliability
- No Internal Crack – No contamination of Hydraulic Oil with Rubber Particles.
- No External Crack –No chance of Hose Burst.
- Protects Expensive Parts like Hydraulic Pump, Valve Block & Rams.
WEAR PADS
- Made from Nylatron NSMP46 – Best Wear Resistant Material
- Can withstand extreme temperature from -30 C to +105C.
- 10 times longer life than standard Nylon.
- Ensures smooth and long working irrespective of low or high temperatures.
TORQUE CONVERTER
- Dynamically balanced due to weights attached to periphery.
- Engineered to match Engine with JCB Synchro Transmission Axle System.
- No danger of damage to the mating bush of the charging pump.
- No vibration, Diesel Savings and High efficiency.
- Operator comfort on long-distance hauling.
- No overloading and No shock loads on the engine.
